Your browser doesn't support javascript.
loading
Mostrar: 20 | 50 | 100
Resultados 1 - 20 de 34
Filtrar
1.
Braz Dent J ; 32(5): 12-22, 2021.
Artículo en Inglés | MEDLINE | ID: mdl-34877974

RESUMEN

The aim of this study was to evaluate the influence of different instruments and mechanisms of agitation of the irrigating solution on the penetration by confocal laser scanning microscopy (CLSM), and the bond strength (BS) of the filling material to the dentin by push-out test. Human premolars were distributed in two experimental groups (n=30), according to the instrumentation system: ProTaper Next (PN) or XP-endo Shaper (XS) and three irrigation protocol (n=10): NaviTip (Nv), XP-endo Finisher (XF), passive ultrasonic irrigation/ XP-endo Finisher (PUIXF). The 2.5% NaOCl and 17% EDTA were the irrigating solutions used. The filling was performed using a lateral condensation technique, with AH Plus added to 0.1% rodhamine B. The roots were sectioned, obtaining 2 slices for each third of the root. The first slice was submitted to the sealer penetration analysis and the push-out test. The second slice was submitted to qualitative analysis (SEM) of the union interface. For the penetration (%) Tukey showed that PNXF (82.38±13.48), PNPUIXF (82.48± 12.02), XSXF (82.24±11.28) and XSPUIXP (86.23±10.45) presented the highest values, different (p<0.05) from PNNv (68.29±15.12) and XSNv (71.41±16.50). The BS (MPa) test evidenced that in the cervical third, PNPF (4.92±1.04) and XPSPF (5.03±0.70) obtained the highest values differing from the others groups (p<0.05). CSLM and SEM showed greater penetration of the sealer on the entire length of the root canal when the irrigation solution was stirred. In conclusion that the association PUI and XP-endo Finisher favored the penetration and bond strength of the filling material to the root dentin.


Asunto(s)
Recubrimiento Dental Adhesivo , Materiales de Obturación del Conducto Radicular , Cavidad Pulpar , Dentina , Resinas Epoxi , Gutapercha , Humanos , Ensayo de Materiales , Irrigantes del Conducto Radicular , Preparación del Conducto Radicular
2.
Braz Oral Res ; 35: e117, 2021.
Artículo en Inglés | MEDLINE | ID: mdl-34816905

RESUMEN

This study evaluated by the efficacy of rotary and reciprocating systems to remove filling material by micro-CT. Sixty human canines were instrumented up to F3 by ProTaper Universal system and filled with AH Plus/ gutta-percha. Specimens were submitted to 1,200 thermal cycles, scanned by microCT SkyScan 1176 and randomly distributed in groups according to the filling material removal protocol (n = 10): ProTaper Universal, ProTaper Universal/xylol, ProTaper Next, ProTaper Next/xylol, Reciproc and Reciproc/xylol. After filling removal, specimens were analyzed by microCT to separately verify the presence of gutta-percha and sealer remnants. The data (mm3) were analyzed by two way ANOVA and Tukey´s test (5%). For the remaining gutta-percha, the use of xylol provided the highest values for Reciproc (7.60 ± 0.73), which was statistically different from the other groups (p < 0.05) that presented lower values and were statistically similar to each other (p > 0.05). For the remaining sealer, xylol provided the highest values (21.25 ± 6.94) different (p < 0.05) from the use of instruments alone (11.47 ± 9.45). ProTaper Next presented the lowest values (8.16 ± 1.37) for the remaining sealer, different (p < 0.05) from that of Reciproc (24.67 ± 6.32). The qualitative analysis revealed that all groups presented some remaining root filling material, with the highest volumes presented by Reciproc and Reciproc/xylol. In conclusion the rotary systems provided greater removal of filling material regardless of the use of xylol. The use of xylol negatively interfered with the action of the reciprocating system in the removal of the gutta-percha and sealer.


Asunto(s)
Materiales de Obturación del Conducto Radicular , Obturación del Conducto Radicular , Cavidad Pulpar/diagnóstico por imagen , Gutapercha , Humanos , Retratamiento , Preparación del Conducto Radicular , Solventes , Microtomografía por Rayos X
3.
Braz. dent. j ; 32(5): 12-22, Sept.-Oct. 2021. tab, graf
Artículo en Inglés | LILACS-Express | LILACS, BBO - Odontología | ID: biblio-1350296

RESUMEN

Abstract The aim of this study was to evaluate the influence of different instruments and mechanisms of agitation of the irrigating solution on the penetration by confocal laser scanning microscopy (CLSM), and the bond strength (BS) of the filling material to the dentin by push-out test. Human premolars were distributed in two experimental groups (n=30), according to the instrumentation system: ProTaper Next (PN) or XP-endo Shaper (XS) and three irrigation protocol (n=10): NaviTip (Nv), XP-endo Finisher (XF), passive ultrasonic irrigation/ XP-endo Finisher (PUIXF). The 2.5% NaOCl and 17% EDTA were the irrigating solutions used. The filling was performed using a lateral condensation technique, with AH Plus added to 0.1% rodhamine B. The roots were sectioned, obtaining 2 slices for each third of the root. The first slice was submitted to the sealer penetration analysis and the push-out test. The second slice was submitted to qualitative analysis (SEM) of the union interface. For the penetration (%) Tukey showed that PNXF (82.38±13.48), PNPUIXF (82.48± 12.02), XSXF (82.24±11.28) and XSPUIXP (86.23±10.45) presented the highest values, different (p<0.05) from PNNv (68.29±15.12) and XSNv (71.41±16.50). The BS (MPa) test evidenced that in the cervical third, PNPF (4.92±1.04) and XPSPF (5.03±0.70) obtained the highest values differing from the others groups (p<0.05). CSLM and SEM showed greater penetration of the sealer on the entire length of the root canal when the irrigation solution was stirred. In conclusion that the association PUI and XP-endo Finisher favored the penetration and bond strength of the filling material to the root dentin.


Resumo O objetivo neste estudo foi avaliar a influência de diferentes instrumentos e mecanismos de agitação da solução irrigadora na penetração e resistência de união (RU) do AH Plus à dentina. Pré molares humanos foram distribuídos em dois grupos experimentais (n=30), de acordo com o sistema de instrumentação: ProTaper Next (PN) ou XP-endo Shaper (XS) e de acordo com três protocolos de irrigação (n=10): NaviTip (Nv), XP-endo Finisher (XF), passive ultrasonic irrigation/ XP-endo Finisher (PUIXF). A irrigação do canal radicular foi realizada com NaOCl 2,5% e EDTA 17%. A obturação foi realizada por meio da técnica da condensação lateral, com AH Plus acrescido de rodhamina B 0,1%. As raízes foram seccionadas, obtendo-se 2 slices de 2,0 mm para cada terço radicular. O primeiro slice foi submetido a análise da penetração do cimento e ao teste de push-out e o segundo slice submetido a MEV para análise da interface de união. Para penetração (%) Tukey evidenciou que PNXF (82,38±13,48), PNPUIXF (82,48±12,02), XSXF (82,24±11,28) e XSPUIXF (86,23±10,45) apresentaram os maiores valores, diferentes (p<0,05) de PNC (68,29±15,12) e XPSC (71,41±16,50). Na RU (MPa) foi evidenciado que PNPF (4,92±1,04) e XPSPF (5,03±0,70), no terço cervical, obtiveram os maiores valores diferentes dos demais (p<0,05). MCVL e MEV evidenciaram maior penetração do cimento em toda extensão da parede do canal radicular inclusive nas regiões polares, quando foi realizada a agitação da solução irrigadora. Concluiu-se que a associação PUI e XP-endo Finisher favoreceu a penetração e resistência de união do material obturador à dentina radicular.

4.
Aust Endod J ; 47(2): 236-244, 2021 Aug.
Artículo en Inglés | MEDLINE | ID: mdl-33249663

RESUMEN

This study evaluated the syringe/needle (SN), passive ultrasonic irrigation (PUI) and XP-endo Finisher (XP) in the removal of Ca(OH)2 -based paste and the bond strength (BS) values of an epoxy resin (AH Plus) and silicate (MTA)-based sealers to root dentin. Eighty lower premolars were assigned: control group (CT), SN, PUI and XP, and subdivided according to the sealer (n = 10) for BS. SN has the lowest removal followed by PUI and XP. AH Plus had higher BS for CT compared with SN in all root thirds. CT and XP presented similar BS in the apical and middle thirds and higher than SN and PUI. For MTA, similar BS was observed in the cervical and apical thirds, and in the middle third, CT, PUI and XP presented similar values and higher than SN. PUI and XP methods presented higher efficiency in the Ca(OH)2 removal, and the residual Ca(OH)2 provides a reduction in BS of the AH Plus.


Asunto(s)
Hidróxido de Calcio , Materiales de Obturación del Conducto Radicular , Diente Premolar , Resinas Epoxi , Silicatos
5.
Braz. oral res. (Online) ; 35: e117, 2021. tab, graf
Artículo en Inglés | LILACS-Express | LILACS, BBO - Odontología | ID: biblio-1350360

RESUMEN

Abstract This study evaluated by the efficacy of rotary and reciprocating systems to remove filling material by micro-CT. Sixty human canines were instrumented up to F3 by ProTaper Universal system and filled with AH Plus/ gutta-percha. Specimens were submitted to 1,200 thermal cycles, scanned by microCT SkyScan 1176 and randomly distributed in groups according to the filling material removal protocol (n = 10): ProTaper Universal, ProTaper Universal/xylol, ProTaper Next, ProTaper Next/xylol, Reciproc and Reciproc/xylol. After filling removal, specimens were analyzed by microCT to separately verify the presence of gutta-percha and sealer remnants. The data (mm3) were analyzed by two way ANOVA and Tukey´s test (5%). For the remaining gutta-percha, the use of xylol provided the highest values for Reciproc (7.60 ± 0.73), which was statistically different from the other groups (p < 0.05) that presented lower values and were statistically similar to each other (p > 0.05). For the remaining sealer, xylol provided the highest values (21.25 ± 6.94) different (p < 0.05) from the use of instruments alone (11.47 ± 9.45). ProTaper Next presented the lowest values (8.16 ± 1.37) for the remaining sealer, different (p < 0.05) from that of Reciproc (24.67 ± 6.32). The qualitative analysis revealed that all groups presented some remaining root filling material, with the highest volumes presented by Reciproc and Reciproc/xylol. In conclusion the rotary systems provided greater removal of filling material regardless of the use of xylol. The use of xylol negatively interfered with the action of the reciprocating system in the removal of the gutta-percha and sealer.

6.
Oral Health Prev Dent ; 18(1): 555-562, 2020.
Artículo en Inglés | MEDLINE | ID: mdl-32515428

RESUMEN

PURPOSE: This study evaluated the effect of 17% EDTA, 10% citric acid (CA), and 2% chlorhexidine (CHX) activated with a rotary microbrush (CanalBrush) on root dentin microhardness, roughness, and epoxy-based sealer bond strength. MATERIALS AND METHODS: One hundred sixty single-rooted bovine incisors were instrumented and divided into 8 groups according to treatment: 1. 17% EDTA; 2. 17% EDTA+2% CHX; 3. 10% CA; 4. 10% CA+2% CHX; 5. 17% EDTA with CanalBrush; 6. 17% EDTA+2% CHX with CanalBrush; 7. 10% CA with CanalBrush; and 8. 10% CA+2% CHX with CanalBrush. Ten roots in each group were split into halves and submitted to microhardness and roughness analyses (n = 10). Following endodontic filling with AH Plus sealer, 10 roots in each group underwent push-out bond strength testing (n = 10). Data were analyzed using two-way ANOVA and Tukey's tests (α = 0.05). RESULTS: All groups had similar microhardness values (p > 0.05) which was higher in the apical third than in the middle and cervical thirds (p < 0.05). The CanalBrush groups had higher roughness than the no-activation groups (p < 0.05), with significantly higher roughness in the cervical third than in the apical third (p < 0.05). All groups exhibited similar bond strength (p > 0.05), with the cervical third being higher, followed by the middle and apical thirds (p < 0.05). CONCLUSIONS: Microbrush activation had a direct impact on dentin roughness and did not influence the dentin microhardness or the retention of epoxy-based sealer to the root canal.


Asunto(s)
Recubrimiento Dental Adhesivo , Materiales de Obturación del Conducto Radicular , Animales , Bovinos , Cavidad Pulpar , Dentina , Ácido Edético , Ensayo de Materiales , Irrigantes del Conducto Radicular
7.
Braz Oral Res ; 32: e18, 2018 Mar 08.
Artículo en Inglés | MEDLINE | ID: mdl-29538480

RESUMEN

The aim of this study was to evaluate the bond strength of different triccalcium silicate cements to retrograde cavity using a push out test. Thirty maxillary central incisors were shaped using #80 hand files and sectioned transversally. Root slices were obtained from the apical 4 mm after eliminating the apical extremity. The specimens were embedded in acrylic resin and positioned at 45° to the horizontal plane for preparation of root-end cavities with a diamond ultrasonic retrotip. The samples were divided into three groups according to the root-end filling material (n = 10): MTA Angelus, ProRoot MTA and Biodentine. A gutta-percha cone (#80) was tugged-back at the limit between the canal and the root-end cavity. The root-end cavity was filled and the gutta-percha cone was removed after complete setting of the materials. The specimens were placed in an Instron machine with the root-end filling turned downwards. The push-out shaft was inserted in the space previously occupied by the gutta-percha cone and push out testing was performed at a crosshead speed of 1.0 mm/min. There was no statistically significant difference in resistance to push out by the materials tested (p > 0.01). MTA Angelus and ProRoot MTA showed predominantly mixed failure while Biodentine exhibited mixed and cohesive failures. The tricalcium silicate-based root-end filling materials showed similar bond strength retrograde cavity.


Asunto(s)
Bismuto/química , Compuestos de Calcio/química , Recubrimiento Dental Adhesivo/métodos , Cavidad Pulpar/efectos de los fármacos , Dentina/efectos de los fármacos , Óxidos/química , Materiales de Obturación del Conducto Radicular/química , Silicatos/química , Análisis de Varianza , Fracaso de la Restauración Dental , Gutapercha/química , Humanos , Ensayo de Materiales , Reproducibilidad de los Resultados , Propiedades de Superficie/efectos de los fármacos , Raíz del Diente/efectos de los fármacos
8.
Braz. oral res. (Online) ; 32: e18, 2018. tab, graf
Artículo en Inglés | LILACS | ID: biblio-889488

RESUMEN

Abstract: The aim of this study was to evaluate the bond strength of different triccalcium silicate cements to retrograde cavity using a push out test. Thirty maxillary central incisors were shaped using #80 hand files and sectioned transversally. Root slices were obtained from the apical 4 mm after eliminating the apical extremity. The specimens were embedded in acrylic resin and positioned at 45° to the horizontal plane for preparation of root-end cavities with a diamond ultrasonic retrotip. The samples were divided into three groups according to the root-end filling material (n = 10): MTA Angelus, ProRoot MTA and Biodentine. A gutta-percha cone (#80) was tugged-back at the limit between the canal and the root-end cavity. The root-end cavity was filled and the gutta-percha cone was removed after complete setting of the materials. The specimens were placed in an Instron machine with the root-end filling turned downwards. The push-out shaft was inserted in the space previously occupied by the gutta-percha cone and push out testing was performed at a crosshead speed of 1.0 mm/min. There was no statistically significant difference in resistance to push out by the materials tested (p > 0.01). MTA Angelus and ProRoot MTA showed predominantly mixed failure while Biodentine exhibited mixed and cohesive failures. The tricalcium silicate-based root-end filling materials showed similar bond strength retrograde cavity.


Asunto(s)
Humanos , Bismuto/química , Compuestos de Calcio/química , Recubrimiento Dental Adhesivo/métodos , Cavidad Pulpar/efectos de los fármacos , Dentina/efectos de los fármacos , Óxidos/química , Materiales de Obturación del Conducto Radicular/química , Silicatos/química , Análisis de Varianza , Fracaso de la Restauración Dental , Gutapercha/química , Ensayo de Materiales , Reproducibilidad de los Resultados , Propiedades de Superficie/efectos de los fármacos , Raíz del Diente/efectos de los fármacos
9.
Braz Oral Res ; 31: e11, 2017 01 26.
Artículo en Inglés | MEDLINE | ID: mdl-28146218

RESUMEN

This study evaluated the removal of filling material with ProTaper Universal Rotary Retreatment system (PTR) combined with solvents and the influence of solvents on the bond strength (PBS) of sealer to intraradicular dentin after canal reobturation. Roots were endodontically treated and distributed to five groups (n = 12). The control group was not retreated. In the four experimental groups, canals were retreated with PTR alone or in combination with xylol, orange oil, and eucalyptol. After filling material removal, two specimens of each group were analysed by SEM and µCT to verify the presence of filling remnants on root canal walls. The other roots were reobturated and sectioned in 1-mm-thick dentin slices that were subjected to the push-out test. Data were analysed by two-way ANOVA and Tukey's test (α = 0.05). SEM and µCT analysis revealed that all retreatment techniques left filling remnants on canal walls. The control group (3.47 ± 1.21) presented significantly higher (p < 0.05) PBS than the experimental groups. The groups retreated with PTR alone (2.59 ± 0.99) or combined with xylol (2.54 ± 0.77) and orange oil (2.32 ± 0.93) presented similar bond strength (p > 0.05), and differed significantly from the group with eucalyptol (1.89 ± 0.63). The solvents reduced the PBS of the sealer to dentin and no retreatment technique promoted complete removal of filling material.


Asunto(s)
Cavidad Pulpar/efectos de los fármacos , Dentina/efectos de los fármacos , Materiales de Obturación del Conducto Radicular/química , Preparación del Conducto Radicular/métodos , Solventes/química , Análisis de Varianza , Ciclohexanoles/química , Recubrimiento Dental Adhesivo , Instrumentos Dentales , Resinas Epoxi/química , Eucaliptol , Gutapercha , Humanos , Ensayo de Materiales , Microscopía Electrónica de Rastreo , Monoterpenos/química , Aceites de Plantas/química , Reproducibilidad de los Resultados , Retratamiento/instrumentación , Preparación del Conducto Radicular/instrumentación
10.
Braz. oral res. (Online) ; 31: e29, 2017. tab, graf
Artículo en Inglés | LILACS | ID: biblio-839514

RESUMEN

Abstract This study evaluates the influence of root dentin treatment with NaOCl alone and combined with EDTA, with and without ultrasound activation, on the push-out bond strength (BS) of fiber-reinforced posts in weakened roots, cemented with RelyX or Panavia. The root canals of 42 maxillary canines were instrumented with Reciproc and 2.5% NaOCl. In the coronal 12mm of all canals, experimental weakening of the roots was produced by reducing dentin thickness with 2.44mm diameter diamond burs. The roots were assigned to 3 groups (n = 14) according to root dentin treatment: 2.5% NaOCl; 2.5% NaOCl + 17% EDTA; and 2.5% NaOCl + 17% EDTA, with solutions agitated using passive ultrasonic irrigation. After cementation of the fiber-reinforced posts the roots were divided in thirds. The first slice of each third was used for the push-out BS test, the second slice for confocal laser scanning microscopy and dentin microhardness (Knoop) analysis. Data were analysed by a two-way ANOVA and Tukey test (a = 0.05). NaOCl + EDTA provided highest BS values than NaOCl (p < 0.0001). Specimens cemented with Panavia presented significantly higher BS than those with RelyX in the three root thirds (p < 0.0001). The highest BS values occurred in the cervical third (p < 0.001). Ultrasound-activated NaOCl + EDTA promoted the greatest reduction in dentin microhardness, followed by NaOCl/EDTA and NaOCl. Ultrasonic activation of NaOCl and EDTA reduced root dentin microhardness, but did not improve the push-out BS of resin-based cements. Panavia presented higher BS than RelyX. RelyX was not influenced by the root dentin treatment protocols.


Asunto(s)
Humanos , Recubrimiento Dental Adhesivo/métodos , Dentina/efectos de los fármacos , Ácido Edético/química , Cementos de Resina/química , Hipoclorito de Sodio/química , Raíz del Diente/efectos de los fármacos , Grabado Ácido Dental/métodos , Análisis de Varianza , Fracaso de la Restauración Dental , Dentina/efectos de la radiación , Pruebas de Dureza , Ensayo de Materiales , Microscopía Confocal , Técnica de Perno Muñón , Distribución Aleatoria , Valores de Referencia , Reproducibilidad de los Resultados , Irrigantes del Conducto Radicular/química , Preparación del Conducto Radicular/métodos , Estadísticas no Paramétricas , Propiedades de Superficie/efectos de los fármacos , Raíz del Diente/efectos de la radiación , Terapia por Ultrasonido
11.
Braz. oral res. (Online) ; 31: e11, 2017. tab, graf
Artículo en Inglés | LILACS | ID: biblio-839534

RESUMEN

Abstract This study evaluated the removal of filling material with ProTaper Universal Rotary Retreatment system (PTR) combined with solvents and the influence of solvents on the bond strength (PBS) of sealer to intraradicular dentin after canal reobturation. Roots were endodontically treated and distributed to five groups (n = 12). The control group was not retreated. In the four experimental groups, canals were retreated with PTR alone or in combination with xylol, orange oil, and eucalyptol. After filling material removal, two specimens of each group were analysed by SEM and µCT to verify the presence of filling remnants on root canal walls. The other roots were reobturated and sectioned in 1-mm-thick dentin slices that were subjected to the push-out test. Data were analysed by two-way ANOVA and Tukey’s test (α = 0.05). SEM and µCT analysis revealed that all retreatment techniques left filling remnants on canal walls. The control group (3.47 ± 1.21) presented significantly higher (p < 0.05) PBS than the experimental groups. The groups retreated with PTR alone (2.59 ± 0.99) or combined with xylol (2.54 ± 0.77) and orange oil (2.32 ± 0.93) presented similar bond strength (p > 0.05), and differed significantly from the group with eucalyptol (1.89 ± 0.63). The solvents reduced the PBS of the sealer to dentin and no retreatment technique promoted complete removal of filling material.


Asunto(s)
Humanos , Cavidad Pulpar/efectos de los fármacos , Dentina/efectos de los fármacos , Materiales de Obturación del Conducto Radicular/química , Preparación del Conducto Radicular/métodos , Solventes/química , Análisis de Varianza , Ciclohexanoles/química , Recubrimiento Dental Adhesivo , Instrumentos Dentales , Resinas Epoxi/química , Gutapercha , Ensayo de Materiales , Microscopía Electrónica de Rastreo , Monoterpenos/química , Aceites de Plantas/química , Reproducibilidad de los Resultados , Retratamiento/instrumentación , Preparación del Conducto Radicular/instrumentación
12.
Braz Oral Res ; 302016.
Artículo en Inglés | MEDLINE | ID: mdl-26910020

RESUMEN

The aim of this study was to evaluate the effects of different root canal filling techniques on the bond strength of epoxy resin-based sealers. Sixty single-rooted canines were prepared using ProTaper (F5) and divided into the following groups based on the root filling technique: Lateral Compaction (LC), Single Cone (SC), and Tagger Hybrid Technique (THT). The following subgroups (n = 10) were also created based on sealer material used: AH Plus and Sealer 26. Two-millimeter-thick slices were cut from all the root thirds and subjected to push-out test. Data (MPa) was analyzed using ANOVA and Tukey's test (α = 0.05). The push-out values were significantly affected by the sealer, filling technique, and root third (p < 0.05). AH Plus (1.37 ± 1.04) exhibited higher values than Sealer 26 (0.92 ± 0.51), while LC (1.80 ± 0.98) showed greater bond strength than THT (1.16 ± 0.50) and SC (0.92 ± 0.25). The cervical (1.45 ± 1.14) third exhibited higher bond strength, followed by the middle (1.20 ± 0.72) and apical (0.78 ± 0.33) thirds. AH Plus/LC (2.26 ± 1.15) exhibited the highest bond strength values, followed by AH Plus/THT (1.32 ± 0.61), Sealer 26/LC (1.34 ± 0.42), and Sealer 26/THT (1.00 ± 0.27). The lowest values were obtained with AH Plus/SC and Sealer 26/SC. Thus, it can be concluded that the filling technique affects the bond strength of sealers. LC was associated with higher bond strength between the material and intra-radicular dentine than THT and SC techniques.


Asunto(s)
Recubrimiento Dental Adhesivo/métodos , Resinas Epoxi/química , Materiales de Obturación del Conducto Radicular/química , Obturación del Conducto Radicular/métodos , Análisis de Varianza , Bismuto/química , Hidróxido de Calcio/química , Cavidad Pulpar/efectos de los fármacos , Fracaso de la Restauración Dental , Dentina/efectos de los fármacos , Gutapercha/uso terapéutico , Humanos , Ensayo de Materiales , Valores de Referencia , Reproducibilidad de los Resultados , Propiedades de Superficie/efectos de los fármacos
13.
Braz Oral Res ; 302016.
Artículo en Inglés | MEDLINE | ID: mdl-26676199

RESUMEN

This study evaluates the effect of two thermoplastic obturation systems (MicroSeal and Obtura II) on bond strength of different sealers to intraradicular dentin. Sixty root canals of human canines were prepared using ProTaper rotary files (crown-down technique) and irrigated with 2.5% sodium hypochlorite and 17% EDTA. The root canals were filled by MicroSeal, Obtura II, or lateral compaction techniques using AH Plus and Epiphany SE. 1.5 mm thick root slices were subjected to the push-out test. ANOVA and Tukey's test showed that the bond strength values (MPa) observed in the groups obturated with MicroSeal (2.96 ± 2.72) and Obtura II (2.68 ± 2.18) did not significantly differ from each other (p > 0.05) but were significantly higher than that observed in the group obturated with lateral condensation (2.01 ± 1.48; p < 0.05). There were no statistically significant differences in strength (p > 0.05) among the root canal thirds (cervical: 2.44 ± 2.03; middle: 2.50 ± 2.27; and apical: 2.70 ± 2.34). Adhesive failures were predominant (60%) in all groups. In conclusion, MicroSeal and Obtura II techniques, using AH plus sealer, increased the resistance to displacement of the filling material, when compared with lateral compaction. Moreover, when used with Epiphany SE, these obturation systems did not affect the bond strength of the material to root dentin.


Asunto(s)
Recubrimiento Dental Adhesivo/métodos , Resinas Epoxi/química , Materiales de Obturación del Conducto Radicular/química , Obturación del Conducto Radicular/métodos , Análisis de Varianza , Fracaso de la Restauración Dental , Dentina/efectos de los fármacos , Gutapercha/química , Humanos , Ensayo de Materiales , Reproducibilidad de los Resultados , Estadísticas no Paramétricas
14.
Braz. oral res. (Online) ; 30(1): e24, 2016. tab
Artículo en Inglés | LILACS | ID: biblio-952025

RESUMEN

Abstract The aim of this study was to evaluate the effects of different root canal filling techniques on the bond strength of epoxy resin-based sealers. Sixty single-rooted canines were prepared using ProTaper (F5) and divided into the following groups based on the root filling technique: Lateral Compaction (LC), Single Cone (SC), and Tagger Hybrid Technique (THT). The following subgroups (n = 10) were also created based on sealer material used: AH Plus and Sealer 26. Two-millimeter-thick slices were cut from all the root thirds and subjected to push-out test. Data (MPa) was analyzed using ANOVA and Tukey's test (α = 0.05). The push-out values were significantly affected by the sealer, filling technique, and root third (p < 0.05). AH Plus (1.37 ± 1.04) exhibited higher values than Sealer 26 (0.92 ± 0.51), while LC (1.80 ± 0.98) showed greater bond strength than THT (1.16 ± 0.50) and SC (0.92 ± 0.25). The cervical (1.45 ± 1.14) third exhibited higher bond strength, followed by the middle (1.20 ± 0.72) and apical (0.78 ± 0.33) thirds. AH Plus/LC (2.26 ± 1.15) exhibited the highest bond strength values, followed by AH Plus/THT (1.32 ± 0.61), Sealer 26/LC (1.34 ± 0.42), and Sealer 26/THT (1.00 ± 0.27). The lowest values were obtained with AH Plus/SC and Sealer 26/SC. Thus, it can be concluded that the filling technique affects the bond strength of sealers. LC was associated with higher bond strength between the material and intra-radicular dentine than THT and SC techniques.


Asunto(s)
Humanos , Materiales de Obturación del Conducto Radicular/química , Obturación del Conducto Radicular/métodos , Recubrimiento Dental Adhesivo/métodos , Resinas Epoxi/química , Valores de Referencia , Propiedades de Superficie/efectos de los fármacos , Bismuto/química , Ensayo de Materiales , Hidróxido de Calcio/química , Reproducibilidad de los Resultados , Análisis de Varianza , Fracaso de la Restauración Dental , Cavidad Pulpar/efectos de los fármacos , Dentina/efectos de los fármacos , Gutapercha/uso terapéutico
15.
Braz. oral res. (Online) ; 30(1): e1, 2016. tab, graf
Artículo en Inglés | LILACS | ID: lil-768263

RESUMEN

This study evaluates the effect of two thermoplastic obturation systems (MicroSeal and Obtura II) on bond strength of different sealers to intraradicular dentin. Sixty root canals of human canines were prepared using ProTaper rotary files (crown-down technique) and irrigated with 2.5% sodium hypochlorite and 17% EDTA. The root canals were filled by MicroSeal, Obtura II, or lateral compaction techniques using AH Plus and Epiphany SE. 1.5 mm thick root slices were subjected to the push-out test. ANOVA and Tukey's test showed that the bond strength values (MPa) observed in the groups obturated with MicroSeal (2.96 ± 2.72) and Obtura II (2.68 ± 2.18) did not significantly differ from each other (p > 0.05) but were significantly higher than that observed in the group obturated with lateral condensation (2.01 ± 1.48; p < 0.05). There were no statistically significant differences in strength (p > 0.05) among the root canal thirds (cervical: 2.44 ± 2.03; middle: 2.50 ± 2.27; and apical: 2.70 ± 2.34). Adhesive failures were predominant (60%) in all groups. In conclusion, MicroSeal and Obtura II techniques, using AH plus sealer, increased the resistance to displacement of the filling material, when compared with lateral compaction. Moreover, when used with Epiphany SE, these obturation systems did not affect the bond strength of the material to root dentin.


Asunto(s)
Humanos , Recubrimiento Dental Adhesivo/métodos , Resinas Epoxi/química , Materiales de Obturación del Conducto Radicular/química , Obturación del Conducto Radicular/métodos , Análisis de Varianza , Fracaso de la Restauración Dental , Dentina/efectos de los fármacos , Gutapercha/química , Ensayo de Materiales , Reproducibilidad de los Resultados , Estadísticas no Paramétricas
16.
Braz Dent J ; 26(3): 288-91, 2015.
Artículo en Inglés | MEDLINE | ID: mdl-26200155

RESUMEN

This study evaluated the bond strength of root-end filling materials to root-end cavities using a new methodology. Twenty maxillary central incisors were subjected to biomechanical preparation (#80 hand file) and sectioned transversally 2 mm short of the apex and 4 mm coronally to this point. The root cylinders were embedded in acrylic resin and positioned at 45° to the horizontal plane for preparation of root-end cavities with a diamond ultrasonic retrotip. Two groups (n=10) were formed according to the root-end filling material: MTA and Super EBA. A gutta-percha cone (#80) was tug-backed at the limit between the canal and the root-end cavity. The cavity was filled and the gutta-percha cone was removed after complete setting of the sealer. The specimens were placed in an Instron machine with the root-end filling turned downwards. The push-out shaft was inserted in the space previously occupied by the gutta-percha cone and run at a crosshead speed of 1.0 mm/min for pushing out the root-end filling material. Data were analyzed by ANOVA (α=5%). Super EBA (6.03±1.31) presented higher bond strength (MPa) than MTA (1.81±0.45) (p>0.05). There was a predominance of cohesive failures for Super EBA and mixed for MTA. The protocol of specimen preparation is effective and introduces a specific methodology for assessing bond strength of root-end filling materials to dentin. Among the materials, Super EBA presented the highest bond strength.


Asunto(s)
Ensayo de Materiales , Materiales de Obturación del Conducto Radicular , Humanos , Técnicas In Vitro , Incisivo
17.
Braz Oral Res ; 292015.
Artículo en Inglés | MEDLINE | ID: mdl-26154369

RESUMEN

This study aimed to evaluate, by means of scanning electron microscopy (SEM), the cleaning of flattened root canals, varying irrigation/aspiration protocols during biomechanical preparation. Thirdy human mandibular incisors were distributed into three groups (n = 10) according to the aspiration/irrigation protocols: conventional, conventional + brush, and apical negative pressure irrigation. Irrigation procedure was performed with 5 mL of 1% NaOCl at each change of instrument; final irrigation was conducted with 17% EDTA for 5 min. After biomechanical preparation, the roots were sectioned and prepared for SEM analysis. The images obtained were evaluated under 35× and 1,000× magnification by three calibrated examiners, following a double-blind design. All data were analyzed using Kruskal-Wallis and Dunn's post hoc tests (α = 0.05). Canals wherein the conventional method and apical negative pressure irrigation were employed revealed less debris, statistically different from the conventional + brush group (p < 0.05). Regarding the presence of smears, apical negative pressure irrigation was more effective in cleaning, showing lowest scores (p < 0.05), compared with the other tested protocols. Comparing each root canal third revealed that the apical portion was difficult to clean as all the tested protocols showed similar high scores (p > 0.05), both for the presence of debris and smear layer. In conclusion, although none of the studied irrigation/aspiration protocols have completely cleaned flattened root canals, apical negative pressure irrigation was more effective in smear layer removal, whereas the conventional + brush protocol was the least effective in removing the debris and smear layer.


Asunto(s)
Cavidad Pulpar/efectos de los fármacos , Irrigantes del Conducto Radicular/uso terapéutico , Preparación del Conducto Radicular/instrumentación , Preparación del Conducto Radicular/métodos , Desbridamiento/instrumentación , Desbridamiento/métodos , Cavidad Pulpar/anatomía & histología , Dentina/efectos de los fármacos , Desinfectantes/uso terapéutico , Ácido Edético/uso terapéutico , Humanos , Microscopía Electrónica de Rastreo , Reproducibilidad de los Resultados , Capa de Barro Dentinario/terapia , Hipoclorito de Sodio/uso terapéutico , Estadísticas no Paramétricas , Propiedades de Superficie , Factores de Tiempo , Resultado del Tratamiento
18.
Photomed Laser Surg ; 33(7): 349-56, 2015 Jul.
Artículo en Inglés | MEDLINE | ID: mdl-26154722

RESUMEN

OBJECTIVE: The purpose of this study was to analyze the effects of agitation of 17% ethylenediaminetetraacetic acid (EDTA) with 1064 nm Nd:YAG and 980 nm diode laser on root dentin microhardness and superficial roughness (with confocal laser scanning microscopy [CLSM]). BACKGROUND DATA: Root canal irrigants are used in an attempt to minimize the negative effects of smear layer. MATERIALS AND METHODS: Twenty-five bovine roots were sectioned longitudinally and divided into five groups (n=10 each): (1) deionized water, (2) 17% EDTA, (3) 17% EDTA with 60 sec manual agitation, (4) 17% EDTA with 50 sec diode laser (2 W) agitation, and (5) 17% EDTA with 50 sec Nd:YAG (1.5 W) laser agitation. Microhardness and superficial roughness values were calculated before and after the procedures at the cervical, middle, and apical root thirds. Microhardness was statistically analyzed using two way ANOVA, paired t test, and Tukey's tests (α=0.05). Roughness was statistically analyzed using Kruskal-Wallis, paired t test, and Student-Newman-Keuls tests (α=0.05%). RESULTS: Statistically significant differences in microhardness and roughness were observed between the deionized water group and others. EDTA with 1064 nm Nd:YAG or 980 nm diode laser presented the lowest microhardness and the highest roughness values and was significantly different from EDTA with manual agitation and EDTA only (p<0.05). However, there were no differences in microhardness or dentin roughness between the root thirds (p>0.05). CLSM analysis showed that the control samples exhibited smoother surfaces than that of the EDTA groups. CONCLUSIONS: Nd:YAG 1064 nm and 980-nm diode laser EDTA agitation caused greater reduction in microhardness and increased roughness of root dentin than EDTA only or EDTA with manual agitation.


Asunto(s)
Ácido Edético , Láseres de Semiconductores , Láseres de Estado Sólido , Terapia por Luz de Baja Intensidad , Raíz del Diente/efectos de la radiación , Raíz del Diente/ultraestructura , Animales , Bovinos , Dureza/efectos de la radiación , Microscopía Electrónica de Rastreo , Irrigantes del Conducto Radicular , Técnicas de Cultivo de Tejidos
19.
Braz. dent. j ; 26(3): 288-291, May-Jun/2015. graf
Artículo en Inglés | LILACS | ID: lil-751872

RESUMEN

This study evaluated the bond strength of root-end filling materials to root-end cavities using a new methodology. Twenty maxillary central incisors were subjected to biomechanical preparation (#80 hand file) and sectioned transversally 2 mm short of the apex and 4 mm coronally to this point. The root cylinders were embedded in acrylic resin and positioned at 45° to the horizontal plane for preparation of root-end cavities with a diamond ultrasonic retrotip. Two groups (n=10) were formed according to the root-end filling material: MTA and Super EBA. A gutta-percha cone (#80) was tug-backed at the limit between the canal and the root-end cavity. The cavity was filled and the gutta-percha cone was removed after complete setting of the sealer. The specimens were placed in an Instron machine with the root-end filling turned downwards. The push-out shaft was inserted in the space previously occupied by the gutta-percha cone and run at a crosshead speed of 1.0 mm/min for pushing out the root-end filling material. Data were analyzed by ANOVA (α=5%). Super EBA (6.03±1.31) presented higher bond strength (MPa) than MTA (1.81±0.45) (p>0.05). There was a predominance of cohesive failures for Super EBA and mixed for MTA. The protocol of specimen preparation is effective and introduces a specific methodology for assessing bond strength of root-end filling materials to dentin. Among the materials, Super EBA presented the highest bond strength.


Este estudo avaliou a resistência de união de materiais retrobturadores a cavidades retrógradas, usando uma nova metodologia. Vinte incisivos centrais superiores foram submetidos ao preparo biomecânico (lima manual #80) e seccionadas transversalmente a 2 mm do ápice e a 4 mm do primeiro corte. Os cilindros de raízes foram incluídos em resina acrílica e posicionado a 45° em relação ao plano horizontal para confecção das retrocavidades com ponta ultrassônica diamantada. Dois grupos (n = 10) foram formados de acordo com os cimentos utilizados: MTA e Super EBA. Um cone de guta-percha (#80) foi travado no limite da retrocavidade com o canal radicular. A retrocavidade foi preenchida e, após o tempo de endurecimento do cimento utilizado, o cone de guta-percha foi removido. Os espécimes foram fixados na máquina universal de ensaios Instron com a retrobturação voltada para baixo. A haste empregada para pressionar o cimento retrobturador no teste de push-out foi inserida no espaço anteriormente ocupado pela guta-percha e acionada com velocidade de cruzeta de 1,0 mm/min, para extrusão do material retroburador. Os dados foram analisados por meio do teste ANOVA (α=5%). O cimento Super EBA (6,03 ± 1,31) apresentou maior resistência de união (MPa) comparado ao cimento MTA (1,81 ± 0,45) (p> 0,05). Houve predomínio de falhas coesivas para o cimento Super EBA e falhas mistas para o MTA. O protocolo de preparação das amostras é eficaz e apresenta uma metodologia específica para avaliação da resistência de união de materiais retrobturadores à dentina. Dentre os materiais testados, o cimento Super EBA apresentou a maior resistência de união.


Asunto(s)
Humanos , Ensayo de Materiales , Materiales de Obturación del Conducto Radicular , Técnicas In Vitro , Incisivo
20.
Braz. oral res. (Online) ; 29(1): 1-9, 2015. tab, ilus
Artículo en Inglés | LILACS | ID: lil-777212

RESUMEN

This study aimed to evaluate, by means of scanning electron microscopy (SEM), the cleaning of flattened root canals, varying irrigation/aspiration protocols during biomechanical preparation. Thirdy human mandibular incisors were distributed into three groups (n = 10) according to the aspiration/irrigation protocols: conventional, conventional + brush, and apical negative pressure irrigation. Irrigation procedure was performed with 5 mL of 1% NaOCl at each change of instrument; final irrigation was conducted with 17% EDTA for 5 min. After biomechanical preparation, the roots were sectioned and prepared for SEM analysis. The images obtained were evaluated under 35× and 1,000× magnification by three calibrated examiners, following a double-blind design. All data were analyzed using Kruskal–Wallis and Dunn’s post hoctests (α = 0.05). Canals wherein the conventional method and apical negative pressure irrigation were employed revealed less debris, statistically different from the conventional + brush group (p < 0.05). Regarding the presence of smears, apical negative pressure irrigation was more effective in cleaning, showing lowest scores (p < 0.05), compared with the other tested protocols. Comparing each root canal third revealed that the apical portion was difficult to clean as all the tested protocols showed similar high scores (p > 0.05), both for the presence of debris and smear layer. In conclusion, although none of the studied irrigation/aspiration protocols have completely cleaned flattened root canals, apical negative pressure irrigation was more effective in smear layer removal, whereas the conventional + brush protocol was the least effective in removing the debris and smear layer.


Asunto(s)
Humanos , Cavidad Pulpar/efectos de los fármacos , Irrigantes del Conducto Radicular/uso terapéutico , Preparación del Conducto Radicular/instrumentación , Preparación del Conducto Radicular/métodos , Desbridamiento/instrumentación , Desbridamiento/métodos , Cavidad Pulpar/anatomía & histología , Dentina/efectos de los fármacos , Desinfectantes/uso terapéutico , Ácido Edético/uso terapéutico , Microscopía Electrónica de Rastreo , Reproducibilidad de los Resultados , Estadísticas no Paramétricas , Propiedades de Superficie , Capa de Barro Dentinario/terapia , Hipoclorito de Sodio/uso terapéutico , Factores de Tiempo , Resultado del Tratamiento
SELECCIÓN DE REFERENCIAS
DETALLE DE LA BÚSQUEDA
...